【タイ求人】【工場管理Assistant General Manager】日系医療機器メーカー向け受託サービスรหัส:75099
60,000 THB ~ 120,000 THBชลบุรี28 วัน ที่ผ่านมาภาพรวม
รายได้ต่อเดือน
60,000 THB ~ 120,000 THB
ประเภทธุรกิจ
Oil&Gas, Manufacturing(Pharmaceutical/Medical Equipment)
รายละเอียด
タイで医療/衛生関連事業に関する受託サービスを行う同社は、設備費が高く自社で処理を行えない中小メーカー向けにサービスを提供しています。
滅菌事業を行う工場の運営・サポートを担当し、サプライチェーンの最終工程を担います。
【業務内容】
・高い品質基準が求められる滅菌事業を行う工場の運営/サポート
・機械管理:20台の稼働状況や不具合がないかなどの確認
・オペレーション管理:スケジュール通りオペレーションが進んでいるかの確認や不具合があった際の調整作業
・オペレーターの管理
・顧客対応:細かい品質基準のチェックやクレーム対応、改善対応などのレポート作成
・財務会計関係の承認作業
・その他工場運営に携わる業務
คุณสมบัติ
คุณสมบัติ
【必須条件】
・タイ語日常会話レベル以上(現場スタッフとコミュニケーションが取れるレベル)
・製造業での工場管理経験(バルブやボイラーへの知見がある方)
【歓迎条件】ความสามารถทางภาษาอังกฤษ
Level 6 - None
ความสามารถทางภาษา (อื่นๆ)
None
ข้อมูลเพิ่มเติม
สวัสดิการ
・ビザ、労働許可証支給
・タイ国社会保険
・グループ医療保険
・通勤補助
・ポジション手当
・食事手当
・賞与
・昇給
・有給
・プロビデントファンドเวลาทำงาน
08:30 ~ 17:00
วันหยุด
土日祝日休み
隔週二回土曜出勤有ประเภทงาน
งานที่เกี่ยวข้อง
New Model Engineer(Chonburi)รหัส:77895
30,000 THB ~ 34,000 THBChonburi6 วัน ที่ผ่านมารายละเอียด
- Responsible for all manufacturing process engineering activities related to new model launch projects at the plant.- The responsibilities cover the entire project lifecycle, starting from the initial project phase (APQP Stage), preparation and procurement of tooling, jigs, fixtures, dies, and machinery.- The position also involves preparing manufacturing process standard documents, including Process Flow, PFMEA, Control Plan, and Work Instructions (WI).- In addition, the engineer is responsible for trial production and Run@Rate activities, through to obtaining part approval (PPAP) and handing over the approved parts to mass production.- The main objective is to ensure that new product launches are completed according to the OEM customer's schedule while achieving the required quality, cost, and delivery targets in compliance with IATF 16949 standards.
Current Model Engineer(Chonburi)รหัส:77896
30,000 THB ~ 34,000 THBChonburi6 วัน ที่ผ่านมารายละเอียด
Responsible for process engineering activities for all mass-produced products (Mass Production / Current Model) throughout the factory.The primary objective is to provide technical support for daily production line operations, troubleshoot production process interruptions (Line Stops), and resolve technical issues related to scrap and defects.1. Production Process Standard Documentation Management- Work Instructions (WI)- Process Failure Mode and Effects Analysis (PFMEA)- Control Plans Maintain and update all process standard documents to ensure they are accurate and up to date.2. Engineering Change Management- Manage and control Engineering Change Notices (ECNs).3. Productivity Improvement Activities- Reduce Cycle Time.- Improve Line Balancing.4. Equipment and Tooling Improvement- Jigs- Fixtures- Tooling Improve and optimize production equipment, jigs, fixtures, and tooling.5. Continuous Improvement Activities- Kaizen- Karakuri Improvement Projects Drive these initiatives to improve production efficiency (Productivity / OEE) and reduce manufacturing costs.All activities must be carried out in compliance with the requirements of the IATF 16949 Quality Management System.
CNC Engineer Supervisorรหัส:77497
40,000 THB ~ 55,000 THBChonburi16 วัน ที่ผ่านมารายละเอียด
- Operate CNC and specialized machinery - Operate CNC Machining Centers, setting up machines according to drawings and assigned programs - Adjust parameters and select tools appropriate to the material and type of work - Inspect workpiece dimensions and quality to ensure they meet standards- Operate EDM Wire Cut and Laser Welding machines - Set up machines and select materials suitable for each job - Inspect dimensions, finish, and accuracy of workpieces after cutting- Material hardness testing - Use a Hardness Tester to verify the hardness properties of workpieces - Record test results and report them to supervisors and relevant departments- Machine care and maintenance - Perform daily machine condition checks and report any issues - Carry out work according to the Preventive Maintenance plan - Clean and maintain machines to keep them ready for operation- Program design and development - Design and develop programs for Machining Center, Wire Cut, EDM, and other machines - Analyze drawings or part designs to determine appropriate manufacturing processes - Select cutting tools and cutting conditions suitable for the machine and material - Test and refine programs so that workpieces meet specifications - Communicate and coordinate with the U.S. engineering team on program design and development- Technical and production support - Provide technical advice and guidance to engineers and technicians - Troubleshoot machine-related problems arising during production - Prepare technical documentation such as CNC programs, production reports, and work instructions - Support process improvement initiatives to increase efficiency, reduce waste, and lower costs - Perform other duties as assigned
Press Assistant Manager รหัส:76971
51,000 THB ~ 62,000 THBChonburi17 วัน ที่ผ่านมารายละเอียด
- Strictly comply with the company's rules, regulations, and departmental requirements.- Implement the company's policies effectively while promoting continuous improvement and efficient management in accordance with ISO standards.- Plan, supervise, and control production operations, including problem-solving, to ensure compliance with the company's requirements.- Define the roles, responsibilities, and job descriptions of production staff and operators.- Plan and approve working hours and overtime for production staff and operators.- Monitor and supervise the training of new employees, skill enhancement programs, and employee development progress, as well as assist in preparing training documentation.- Review and monitor the preparation and maintenance of production-related documents used within the department, such as Work Instructions (WI), Quality Points (Q Point), Operation Standards (OPS), and other related documents.- Report production line stoppages caused by various issues, provide instructions to employees during abnormal situations, and periodically report the progress and corrective actions to management.- Coordinate with relevant departments to plan the utilization of machinery, manpower, and raw materials.- Improve and develop production processes to reduce manufacturing defects and waste while increasing production efficiency to achieve the company's targets.- Plan and manage departmental safety activities, monitor and follow up on safety performance, and coordinate with the company's Safety Officer to ensure compliance with safety regulations.
กรุณาลงชื่อเข้าใช้เพื่อดำเนินการสมัครงานต่อ